INSTALLATION
!

XLS 402

S CR560
Weight: kg
CROWN
Minimum Guaranteed Power
per channel, both channels driven
  XLS 202 XLS 402 XLS 602 XLS 802 XLS 5000
1 kHz with 0.5% THD
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge-Mono, 8 ohms
Bridge-Mono, 4 ohms

--
300W
200W
600W
--

--
450W
300W
900W
--

--
600W
380W
1,200W
--

--
800W
500W
1,600W
--

*750W for
100V
models

2,500W**
1,800W*
1,100W*
3,600W*
5,000W**

*with 0.1% THD
**with 1% THD
  • Reliable design incorporates many popular features
  • Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

XLS 602

S CR561
Weight: kg
CROWN
Minimum Guaranteed Power
per channel, both channels driven
  XLS 202 XLS 402 XLS 602 XLS 802 XLS 5000
1 kHz with 0.5% THD
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge-Mono, 8 ohms
Bridge-Mono, 4 ohms

--
300W
200W
600W
--

--
450W
300W
900W
--

--
600W
380W
1,200W
--

--
800W
500W
1,600W
--

*750W for
100V
models

2,500W**
1,800W*
1,100W*
3,600W*
5,000W**

*with 0.1% THD
**with 1% THD
  • Reliable design incorporates many popular features
  • Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

XTI 1002

S CR889
Weight: kg
SPECIAL LIMITED PROMOTION
CROWN
Output Power 700W @ 2 Ohms Stereo (per Channel)
500W @ 4 Ohms Stereo (per Channel)
275W @ 8 Ohms Stereo (per Channel)
1400W @ 4 Ohms Bridged-Mono
1000W @ 8 Ohms Bridged-Mono
Damping Factor 20Hz to 1kHz > 500
Input Sensitivity 1.4Vrms
Input Impedance 20k Ohms (Balanced)
10 kOhms (Unbalanced)
Gain 32.9dB @ 1kHz, 8 Ohm Rated Output
Frequency Response (at 1 watt, 20Hz - 20kHz) +0dB, -1dB
Signal-to-Noise Ratio XTi1002/2002/4002: 100dB (A weighted)
XTi6002: 103dB (A weighted)
Total Harmonic Distortion (THD) < 0.5%
Connections Input Connectors: XLR, one per channel
Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.
Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
HiQnet USB Connector: Type B, connects to HiQnet network.
Controls Front Panel Level: Two front-panel rotary level controls, one for each channel
Power Switch: On/Off switch applies AC power to the amplifier
Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout
LCD Screen: Backlit liquid crystal display that shows preset and processing status
Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip
Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions
Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
Cooling Proportional speed fan with front-to-rear airflow.
Power Consumption 6.8A; no more than 38W at idle
Power Requirements 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
Dimensions 19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)
Weight 18.5 lbs (8.4kg)
Specialties DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer
Protection for Short Circuits, Overloads, and Overheating

XTI 2002

S CR890
Weight: kg
CROWN
Output Power 1000W @ 2 Ohms Stereo (per Channel)
800W @ 4 Ohms Stereo (per Channel)
475W @ 8 Ohms Stereo (per Channel)
2000W @ 4 Ohms Bridged-Mono
1600W @ 8 Ohms Bridged-Mono
Damping Factor 20Hz to 1kHz > 500
Input Sensitivity 1.4Vrms
Input Impedance 20k Ohms (Balanced)
10 kOhms (Unbalanced)
Gain 32.9dB @ 1kHz, 8 Ohm Rated Output
Frequency Response (at 1 watt, 20Hz - 20kHz) +0dB, -1dB
Signal-to-Noise Ratio XTi1002/2002/4002: 100dB (A weighted)
XTi6002: 103dB (A weighted)
Total Harmonic Distortion (THD) < 0.5%
Connections Input Connectors: XLR, one per channel
Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.
Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
HiQnet USB Connector: Type B, connects to HiQnet network.
Controls Front Panel Level: Two front-panel rotary level controls, one for each channel
Power Switch: On/Off switch applies AC power to the amplifier
Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout
LCD Screen: Backlit liquid crystal display that shows preset and processing status
Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip
Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions
Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
Cooling Proportional speed fan with front-to-rear airflow.
Power Consumption 8.3A; no more than 38W at idle
Power Requirements 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
Dimensions 19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)
Weight 18.5 lbs (8.4kg)
Specialties DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer
Protection for Short Circuits, Overloads, and Overheating

XLS 802

S CR562
Weight: kg
CROWN
Minimum Guaranteed Power
per channel, both channels driven
  XLS 202 XLS 402 XLS 602 XLS 802 XLS 5000
1 kHz with 0.5% THD
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge-Mono, 8 ohms
Bridge-Mono, 4 ohms

--
300W
200W
600W
--

--
450W
300W
900W
--

--
600W
380W
1,200W
--

--
800W
500W
1,600W
--

*750W for
100V
models

2,500W**
1,800W*
1,100W*
3,600W*
5,000W**

*with 0.1% THD
**with 1% THD
  • Reliable design incorporates many popular features
  • Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

CTS 1200

S CR549
Weight: kg
CROWN

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

  • High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
  • Crown Switching Power Supply for lighter weight
  • Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
  • 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
  • Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
  • 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
  • Comprehensive array of indicators provide accurate diagnostics
  • Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.

CTS 2000

S CR550
Weight: kg
CROWN

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

  • High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
  • Crown Switching Power Supply for lighter weight
  • Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
  • 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
  • Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
  • 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
  • Comprehensive array of indicators provide accurate diagnostics
  • Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.

R 500

S IN544
Weight: kg
INTER-M
  • Controls:
    Front : Power on/off switch, attenuator, LED indicator
    Rear : Mode seletor switch, Stereo/bridged mono switch
  • Connectors:
    Input : 1 XLR, 1/4" balanced per channel
    Output : 5-way binding post and SpeakonTM per channel
  • Indicators:
    Power : Green, Protection : Red, Clip : Red, Signal : Green
  • Power Source: 100-120VAC or 220-240VAC; 50/60Hz
    (supplied AC mains transformer depends on country requirements)
  • Power Consumption: 480W(3.9A)
  • Weight: 23 lbs. (10.4 kg)
  • Dimensions: 19" x 3.5"H x 12.5"D (482W x 88H x 317D mm)
  • CM 20.5

    S IN546
    INTER-M

    Description

    The CM-5.5/7.5/10.5/15.5/20.5 are dual-channel concert-grade amplifiers. Their low profile and exceptional sound quality make them ideal for permanent installation in professional PA systems or for road use in live performances. Inputs are XLR/TRS "Combo" connectors, and outputs are via rugged five-way binding posts or Speakon® connectors. Multiple amplifiers may be linked together via XLR connectors on each input. All units have soft-start protection circuitry and feature signal protection and clip indicators on the front panel. For added versatility, they may be operated in stereo, dual mono or bridged mono mode. Variable-speed fans provide low-noise ventilation. The CM-series amplifiers are powered by 100-120VAC or 220-240VAC@50/60Hz (depending on country requirements) and are packaged in 3.5" (2RU) or 5.25” (3RU) high rack mount enclosures.

    CM 15.5

    S IN545
    Weight: kg
    INTER-M

    Description

    The CM-5.5/7.5/10.5/15.5/20.5 are dual-channel concert-grade amplifiers. Their low profile and exceptional sound quality make them ideal for permanent installation in professional PA systems or for road use in live performances. Inputs are XLR/TRS "Combo" connectors, and outputs are via rugged five-way binding posts or Speakon® connectors. Multiple amplifiers may be linked together via XLR connectors on each input. All units have soft-start protection circuitry and feature signal protection and clip indicators on the front panel. For added versatility, they may be operated in stereo, dual mono or bridged mono mode. Variable-speed fans provide low-noise ventilation. The CM-series amplifiers are powered by 100-120VAC or 220-240VAC@50/60Hz (depending on country requirements) and are packaged in 3.5" (2RU) or 5.25” (3RU) high rack mount enclosures.

    PM 9208

    S IN547
    Weight: kg
    INTER-M
     

    Description

    The PM-9208 monitor panel provides audible and visual monitoring of up to eight single-channel amplifiers or speaker lines. Eight 10-segment LED displays monitor up to eight amplifier outputs or speaker lines, with five-step attenuation to match different amplifier levels. A built-in speaker allows audible monitoring of the selected channel and features four-step attenuation. The speaker is passive (no internal amplifier) and the LED display requires 24VDC(power supply not included)

    XLS 2000

    S CR1368
    Weight: kg

    1160 E

    S CR1369
    Weight: kg

    PA AMPLIFIER