ACCESORIES
!

B29L

A AK216
Weight: kg

AKG

The B 29 L powers one or two C 4.. L version MicroMic III Series microphones (except for the D 409 L which requires no phantom power). The B 29 L features an on/off switch and status LED as well as a mic/line selector for matching the output level to the input of the connected mixer or recorder, etc. The B 29 L operates on one standard 9-V battery. Average battery life is 50 hours. Two volume controls allow you to balance the levels of the two microphones. A supplied clip makes it easy to attach the B 29 L to a belt or guitar strap, etc.

CU40

A AK217
Weight: kg
AKG

Charging current: 550 mA typ.
• Charging time: 1 hour max.
• Suited for: GB 40
• MP 40
• SO 40
• Size: 100 x 58 x 135 mm

CU400

A AK218
Weight: kg
AKG

Any wireless microphone system depends on sufficiently charged batteries in all the transmitters. There is nothing more embarrassing than a transmitter running out of juice in the middle of the show, or a voice fading as the transmitter battery dies.

The CU 400 charging unit puts an end to this kind of hassle. It can charge two batteries simultaneously to full capacity within one hour, and there is no risk of overcharging the batteries.

And what's best, you can leave the batteries inside the WMS 40 or WMS 450 transmitters. The transmitters and charger use integrated charging contacts so all you have to do is plug the transmitters into the CU 400 charging unit and remove them after charging.

H40

A AK219
Weight: kg
AKG

Tie clip for use with all lavalier microphones, holds 1 or 2 lavalier microphones.

H50

A AK220
Weight: kg
AKG

The AKG H 50 Stereo bar for mounting two microphones 60 to 170 mm apart. Useful stereo bar, twin microphone mount for stereo recording applications.

The AKG H 50 is an optional stereo bar for mounting two microphones 60 to 170 mm (2.4 to 6.7 in.) apart.

The main features of the AKG H 50 include:

-Useful stereo bar, twin microphone mount for stereo recording applications

-Mounts on a microphone stand

MPAIII-L

A AK221
Weight: kg
AKG
Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch

W407/W97/1

A AK223
Weight: kg
AKG

Windscreen for all variations of C407L and C417

Windscreen for the CK 97-C, CK 97-C/3, or CK 97-CVR AKG Blue Line miniature microphones.

SCM 410E

S SH931
Weight: kg
SHURE

Shure SCM410

This four-channel, gated, automatic mixer features gating which activates only microphones being addressed, minimizing poor audio caused by multiple open microphones. Modified for use with Voice Recognition Systems, this mixer will permit only one gate to be open at any time. Ideal for active households. The SCM410 automatic gated mixer is designed specifically for installed sound applications. The SCM410 works great with Voice Recognition Systems such as HAL2000 where multiple microphones are desired. Utilizing Multi-Colored LED's, each channel indicates when the gate or channel is active and when it is "clipping". Other Features include 12 V phantom power, four active balanced XLR microphone-level inputs, line-level outputs, highly RF resistant chassis and circuitry, complete logic control of microphone activation, linking capacity for up to 400 microphones, with an internal power supply. 120/230 Vac power.

W23

A AK222
Weight: kg
AKG
AKG W23 Foam Windscreen for C535EB, C5900, D3700, D3800

A400SM

A SH011
Weight: kg
SHURE
The A400SM, A400XLR, A400SMXLR and A99SMA are accessories that allow permanent installation of a quick-release shock mount for use with a wide variety of gooseneck microphones. The A400SM Shock Mount employs Shure Shock-Stopper TM construction, which decouples the microphone from the mounting surface and reduces the transmission of impact or surface noise by up to 20 dB.

A58WS

A SH013
Weight: kg
SHURE

Windscreens for larger Shure "ball-type" microphones, such as the SM48, SM58, Beta 58A, or 565SD.

Black - A58WS-BLK
Blue - A58WS-BLU
Gray - A58WS-GRA
Green - A58WS-GRN
Red - A58WS-RED
Yellow - A58WS-YEL

M35X

A SH015
Weight: kg
SHURE
M35X House/Techno - Mix/Spin. The M35X brings music alive by capturing every nuance of a recording, from deep drop bass to exceptionally clear mid and high frequencies. Designed specifically for use with House/Techno mixing environments, the cartridge's low record wear helps DJs preserve hard-to-replace vinyl, while its high skip resistance serves as a safeguard against the hazards of back-cueing.
The M35X combines high sonic accuracy and incredible skip resistance, all while keeping record wear to a minimum.

A50D

A SH012
Weight: kg
SHURE
Use the Shure A50D to mount a microphone onto a drum. A screw on the mount secures the microphone, and an adaptive brass washer (European insert) is available to accommodate an even wider range of microphone models. The flexible, yet sturdy, rubber construction provides stability and ease of installation.

SS35C

A SH017
Weight: kg
SHURE
SS35C Single, with Box and User Guide
Replacement Needle for SC35C, Single, with Box and User Guide

STANDS37A

A SH018
Weight: kg
SHURE
The S37A desk stand features a low-profile design for use with various Shure swivel adapters and shock mounts, and has a non-reflective, textured, gray finish.

WA 502

A SH924
Weight: kg
SHURE
WA502 Description : Rack Kit for Mounting of one SC4 Receivers in a Side by Side, Half Rack Format Shure WA502 Features : The Shure WA502 Dual Rack Mount Kit is a half rack mounting assembly that is compatible with the HR standard. A single WA502 kit can be used to mount an LX3, LX4 or SC4 receiver next to other equipment compatible with the HR format.