PORTABLE
!

EON 210P

S JB874
Weight: kg
JBL
System
- System Type: Powered mixer with 2 two-way bass-reflex enclosures
- Maximum SPL Output: 124 dB peak system output (pink noise)
- Frequency Range (-10 dB): 60 Hz - 20 kHz
- Frequency Response (+/-3 dB): 75 Hz - 19 kHz
- AC input: 120 - 240 V 50/60 Hz, voltage selector switch sets operational range

Amplifier
- Design: Crown Class D
- System Power Rating: 300 Watts (2 X 150 W Sine Wave Burst)
- Output Connector: 2 X 1/4 in. TS (unbalanced) amplifier outputs

Mixer
- Input Connectors: 8 inputs (4 Mono Mic/Line, 2 X Stereo)
- Channels:
- - 1-4: XLR / 1/4 in. jack combo connectors; XLR is mic level input, 1/4 in. is line level input
- - 5-6: Two of 1/4 in. balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
- - 7-8: 3.5 mm stereo jack
- Input Impedance:
- - 1-4 Combo: XLR 3 K Ohms Balanced, Ch 1-4 Combo: TRS 20 K Ohms Balanced
- - 5-6: TRS 25 K Ohms Balanced
- - 5-6: RCA 12 K Ohms Unbalanced
- - 7-8: 3.5 mm 30 K Ohms Unbalanced
- Phantom Power: 30 V
- Output Connectors:
- - Monitor outputs: Two 1/4 in. balanced TRS jacks (stereo), and RCA jacks (stereo)
- - Headphone output: 3.5 mm stereo jack
- Signal Indicators: Main Output LED Ladder Limit: Red LED indicates limiter active condition; Signal: Green LED indicates signal present
- Signal Indicators (CH 1-4): Peak LED: Green = signal present, Red = input overload
- EQ: Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
- System Limiter: On Board DSP Limiting and Tuning

Speaker
- LF Driver: 1 x JBL 328 H 250 mm (10 in) woofer
- HF Driver: 1 x JBL 2414H-1 37.5 mm (1.5 in.) annular polymer diaphragm, neodymium compression driver
- Coverage Pattern: 100 x 60 degrees nominal
- Crossover Frequency: 2 kHz
- Crossover Type: Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
- Enclosure: Polypropylene
- Suspension/ Mounting: 36 mm pole socket with stabilizing screw
- Handles: One on top
- Grille: Powder coated perforated steel
- Net Weight of System: 33 lbs.
Dimensions and Weight in Packaging
Base Item
Shipping Weight: 43 lbs
Shipping Dimensions: 14 x 26 x 22 in
PA Pack
Shipping Weight: 65 lbs

EON 315

S JB442
Weight: kg

JBL

  • System Type Self-powered 15", two-way, bass-reflex design
  • Frequency Range (-10 dB) 38 Hz - 20 kHz (EQ in ‘Flat’ position)
  • Coverage Pattern 100° H x 60° V nominal
  • Crossover Frequency 1.8 kHz
  • System Power Rating 280 W continuous, 560 W peak
  • Maximum SPL 127 dB
  • Boost EQ LF +3 dB Shelving Filter @ 150 Hz
  • HF +2.5 dB Shelving Filter @ 4 kHz
  • LF Driver 1 x M115-2 380 mm (15 in)
  • HF Driver 1 x JBL 2414H-1 25.4 mm (1 in) polymer diaphragm, neodymium compression driver
  • Input connector Balanced XLR / 1/4 inch TRS combo jack
  • Output connector Balanced male XLR, +20 dBu (peak) o/p level
  • Suspension / Mounting 36 mm pole socket with stabilizing screw, 4 x M10 suspension points,
  • 1 x M10 pull-back point.
  • AC input 120 – 240 V, 50/60 Hz
  • Dimensions (H x W x D) 685 mm x 438 mm x 366 mm (27 in x 17.3 in x 14.4 in)
  • Net Weight 15.9 kg (35 lb)

EON 510

S JB530
Weight: kg

JBL

  • System Type: Self powered 10", two-way, bass-reflex design
  • Frequency Range (-10 dB): 58 Hz - 18.5 kHz (EQ in ‘Flat’ position)
  • Frequency Response (±3 dB): 70 Hz - 17 kHz (EQ in ‘Flat’ position)
  • Coverage Pattern: 100° H x 60° V nominal
  • Directivity Index (DI): 9 dB
  • Directivity Factor (Q): 8
  • Crossover Frequency: 1.8 kHz
  • System Power Rating: 280 W continuous, 560 W peak
  • LF Power amp: 220 W continuous at driver impedance
  • HF Power amp: 60 W continuous at driver impedance
  • Distortion: Less than 0.1% at rated power
  • Maximum SPL: 121 dB
  • Signal indicators: Limit: Red LED indicates input overload condition
  • Signal: Green LED indicates signal present
  • Mic/Line: Red LED indicator
  • Input Gain (input 3): Mic position: -Infinity to +40 dB
  • Line position: -Infinity to +4 dB (+20 dBu Max signal input)
  • Input Gain (input 1 & 2): -Infinity to +4 dB (+20 dBu Max signal input)
  • Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)
  • Boost EQ: LF +3 dB Shelving Filter @ 150 Hz
  • HF +2.5 dB Shelving Filter @ 4 kHz
  • Low Cut Filter: Preset high pass @ 120 Hz
  • LF Driver: 1 x JBL 261F 254 mm (10 in) Differential Drive® integrated woofer
  • with dual 1.5” voice coils.
  • HF Driver: 1 x JBL 2414H-1 25.4 mm (1 in) neodymium compression driver
  • Input 3 connector: Balanced XLR / . inch TRS combo jack with XLR loop through,
  • Input 1 & 2 connector: . inch TRS jack
  • Output (Loop/Mix switch): Balanced male XLR, +20 dBu (peak) o/p level in MIX position
  • XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
  • Limiting/Protection: Dynamic Limiter
  • Enclosure: PP impact copolymer, multi-purpose main & monitor orientation.
  • Handles: One on top with rubber grip
  • Suspension / Mounting: 36 mm pole socket with stabilizing screw, 3 x M10 suspension
  • points, 1 x M10 pull-back point
  • Grille: Powder coated perforated steel with acoustically transparent
  • black screen backing.
  • AC input: 120 – 240 V, 50/60 Hz
  • Dimensions (H x W x D): 490 mm x 313 mm x 262 mm (19.3 in x 12.3 in x 10.3 in)
  • Net Weight: 7.7 kg (17 lb)

EON 515

S JB531
Weight: kg
SPECIAL LIMITED PROMOTION

JBL

  • System Type: Self powered 15", two-way, bass-reflex design
  • Frequency Range (-10 dB): 39 Hz -20 kHz (EQ in ‘Flat’ position)
  • Frequency Response (±3 dB): 42 Hz - 18 kHz (EQ in ‘Flat’ position)
  • Coverage Pattern: 100° H x 60° V nominal
  • Directivity Index (DI): 9 dB
  • Directivity Factor (Q): 8
  • Crossover Frequency: 2.2 kHz
  • System Power Rating: 450 W continuous, 900 W peak
  • LF Power amp: 350 W continuous at driver impedance
  • HF Power amp: 100 W continuous at driver impedance
  • Distortion: Less than 0.1% at rated power
  • Maximum SPL: 129 dB
  • Signal indicators: Limit: Red LED indicates input overload condition
  • Signal: Green LED indicates signal present
  • Mic/Line: Red LED indicator
  • Input Gain (input 3): Mic position: -Infinity to +40 dB
  • Line position: -Infinity to +4 dB (+20 dBu Max signal input)
  • Input Gain (input 1 & 2): -Infinity to +4 dB (+20 dBu Max signal input)
  • Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)
  • Boost EQ: LF +3 dB Shelving Filter @ 200 Hz
  • HF +2.5 dB Shelving Filter @ 4 kHz
  • Low Cut Filter: Preset high pass @ 120 Hz
  • LF Driver: 1 x JBL 265F-1 380 mm (15 in) Differential Drive® integrated
  • woofer with dual 2" voice coils
  • HF Driver: 1 x JBL 2414H 25.4 mm (1 in) neodymium compression driver
  • Input 3 connector: Balanced XLR / ¼ inch TRS combo jack with XLR loop through
  • Input 1 & 2 connectors: Balanced ¼ inch TRS jack
  • Output (Loop/Mix switch): Balanced male XLR, +20 dBu (peak) o/p level in MIX position
  • XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
  • Limiting/Protection: Dynamic Limiter
  • Enclosure: PP impact copolymer, multi-purpose main & monitor orientation.
  • Handles: One left/right side, one on top, with rubber grip
  • Suspension / Mounting: 36 mm pole socket with stabilizing screw, 4 x M10 suspension
  • points, 1 x M10 pull-back point
  • Grille: Powder coated perforated steel with acoustically transparent
  • black screen backing.
  • AC input: 120 – 240 V, 50/60 Hz
  • Dimensions (H x W x D): 685 x 438 x 366 mm (27.0 in x 17.3 in x 14.4 in)
  • Net Weight: 14.8 kg (32.5 lb)

EON 515XT

S JB875
Weight: kg

JBL

System Power Rating   :   625 Watts (525 + 100)
Frequency Range (-10 dB)   :   39 Hz -20 kHz
Dimensions (H x W x D)   :   673 mm x 406 mm x 368 mm (26.5” x 16” x 14.5”)
System Type   :   Self powered 15”, two-way, bass-reflex
Maximum SPL Output   :   132 dB
Frequency Response (±3 dB)   :   42 Hz - 18 kHz
Input Connectors   :   2 x 1/4” TRS phone jacks balanced/unbalanced 1 x XLR / 1/4” TRS combo jack with XLR loop through
Input Impedance   :   14k ohms
Signal Indicators   :   Limit: Red LED indicates limiter active condition
Signal: Green LED indicates signal present
Mic: Indicates the MIC/LINE switch is in the “MIC” position
EQ: Individual Bass and Treble controls, center detent, 6 dB cut and boost
Bass +/- 6 dB (200 Hz turnover frequency)
Treble +/- 6 dB (4 kHz turnover frequency)
Mic Input Gain   :   -Infinity to +40 dBu
Line Input Gain   :   -Infinity to +4 dBu (+18 dBu maximum input level)
Limiter   :   Yes
Amplifier Design   :   Crown® Class-D
LF Driver   :   1 x JBL 265F-1 380 mm (15”) Differential Drive® integrated woofer with dual 2” voice coils
HF Driver   :   1 x JBL 2414H 37.5 mm (1.5”) annular polymer diaphragm, neodymium compression driver
Coverage Pattern   :   100º H x 60º V nominal
Crossover Frequency   :   1.7 kHz
Material   :   Polypropylene, multi-purpose main & monitor
Suspension / Mounting   :   36 mm pole socket with stabilizing screw, 5 x M10 suspension points
Handles   :   One left/right side, one on top, with rubber grip
Finish   :   Black Granite
Grille   :   Powder coated perforated steel with acoustically transparent cloth backing
Net Weight   :   14.8 kg (32.5 lb)

EON 518S

S JB532
Weight: kg

JBL

  • System Type: Self powered 18", bass-reflex design
  • Frequency Range (-10 dB): 36 Hz - 130 Hz
  • Frequency Response (±3 dB): 42 Hz - 100 Hz
  • Crossover Frequency: 120 Hz (HPF selectable on outputs)
  • System Power Rating: 500 W continuous, 1000 W peak
  • Distortion: Less than 0.1% at rated power
  • Maximum SPL: 129 dB
  • Signal indicators: Limit: Red LED indicates input overload condition
  • Signal: Green LED indicates signal present
  • Input Gain: - Infinity to +4 dBu
  • Input Impedance: Nominal 20k Ohms (balanced)
  • Polarity: 0° or 180° phase shift
  • LF Driver: 1 x JBL 268G 460 mm (18”) Differential Drive® integrated
  • woofer with dual voice coils, 4 ohm impedance
  • Enclosure: 18 mm, plywood
  • Suspension / Mounting: 36 mm pole socket on top
  • Finish: DuraFlex™ finish
  • Grille: Powder coated perforated steel with acoustically transparent
  • black screen backing.
  • Input Connectors: Balanced XLRs with loop through (stereo) to balanced XLR
  • satellite outputs. ." Speaker level input.
  • XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
  • AC input: 120 – 230 V, 50/60 Hz
  • Dimensions (H x W x D): 617 mm x 569 mm x 652 mm (24.3 in x 22.4 in x 25.7 in)
  • Net Weight: 29.5 kg (65 lb)

EON10 G2 + EON 10 BAG (COVER)

S JB057
Weight: kg
Oferta promo limitata pana la 24 Ianuarie orele 00:00

JBL

Powered 10" Portable Speaker System, Bi-Amplified, 125 watt Low-Frequency, 50 watt High-Frequency, 10" Differential Drive® Woofer with Neodymium Magnet, 1" (Exit) Titanium Diaphragm Ferrofluid Cooled Compression Driver, Black with 'EON' Embossed Grille.

EON15P-1/230

S JB059
Weight: kg
JBL
The speakers that started the portable powered speaker revolution. Portable, practical and powerful, EON provides solutions for your entire sound system

JRX 115i

S JB061
Weight: kg
JBL

The JRX115i is an economical, suspendable, fifteen-inch, two-way speaker

system designed for installation where ground stacking or pole mounting is

impractical or undesirable. The JRX115i is well suited to a variety of sound

reinforcement applications including live music, music playback and

speech. Other than the substitution of three, threaded M10 suspension

points for the handles, feet and pole-mount, the JRX115i is identical to the

popular JRX115 portable sound reinforcement speaker.

JRX 118S

S JB062
Weight: kg
JBL
JRX 118 S 18" passive subwoofer - 350Watt/4 Ohms, 96dB SPL, 127dB max, 38-300Hz, 2x Speakon and jack connections. Dimensions: 59.7 x 51.6 x 55.9cm. Weight: 32.2kg 

MS 105

S JB069
Weight: kg
JBL

JBL Marquis 300W / 8Ohms

The model MS105 is a full range
loudspeaker providing extended bandwidth,
high SPL capability and self-protection in a
compact enclo.

PRX 535

S JB073
Weight: kg

JBL

15" Three-Way Self-Powered Speaker System; 400 watt LF and 150 watt MF and 100 watt HF Crown® Class D Amplifiers. DSP-Featured Input Section with Selectable EQ. 15" Differential Drive®  Woofers, 6.5” Horn Loaded Mid Range and a 1.5” Annular Polymer Diaphragm Compression Driver. DuraFlex™-Covered, Plywood Enclosure, Tough Polyurethene Protective End-Caps, Steel Foam Backed Grille, Die-Cast Metal Handles, Non-Skid Rubber Feet. Light Weight, 33.5 kg (74 lbs).

PRX 618 S

S JB737
Weight: kg
JBL

Features :

Maximum SPL 129 db peak
460 mm (18 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer
600 Watt Class-D, Crown® digital amplifier
Professional XLR line and ¼" Mic/Instrument inputs
Stereo input and Loop-Thru capability
Top panel 36mm pole mount socket for sub/satellite configuration
16 Gauge, dent resistant grille
Obsidian DuraFlex™ coated plywood construction
Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort
 

Specifications :
   
System Type: Self-Powered 18",
             bass - reflex 
Maximum SPL Output: 129 dB peak  
Frequency Range (-10 dB): 41 Hz – 130 Hz 
Frequency Response (±3 dB): 50 Hz – 100 Hz 
Polarity: Normal or reverse polarity 
Crossover Frequency: 120 Hz 
Amp Design: Crown® Class D 
Power Rating: 600 W 
Dimension (H x W x D): 685.8 mm x 530.9 mm x 614.7 mm ( 27.0 in x 20.9 in x 24.2 in ) 
Net Weight: 32 kg ( 70.5 lb )

SR 4735X

S JB075
Weight: kg
JBL

The SR4735X (600W / 8 ohms)15" three-way system is perfect for long-throw applications in which the power and additional control of a horn-loaded cone midrange driver is desired. The system boasts extremely wide frequency response and is a great choice as an arrayable, front-of-house reinforcement system.